National Deterrent Systems :: Catalog and Order Form

		view catalog and prices, place an order

From this page you can view our product, enter quantities and calculate your cost. When you are ready to place your order, just fill out the required contact and shipping information at the end of this page and submit. We will send a written quotation to obtain your approval signature and payment information prior to shipping any goods.

Note: All prices are in US Dollars

Form Instructions:

  1. Click into the Qty box (green area) of the item(s) you want.
  2. Type in your required quantity and press your "Tab" key.
  3. DO NOT use your "Enter" key.
  4. ' ** ' indicates required informtion.
  5. After all information is entered, click on the "Submit" button at the end of this
     form.

If you are not sure what you need, request a quote. Answer the questions so we can determine the best solution for you, and we will send you a proposal.


NDS System Packages

National Deterrent Systems pricing is extremely competitive, but you can save even more by purchasing our pre-defined system packages. Check out the great price savings below!


Starter "LITE" Package	$595.00
Sentinel Hard Tag Package	$1714.50
Additional Sentinel Pillar	$1395.00
Stealth Hard and Soft Tag Package A	$2395.00
Stealth Hard and Soft Tag Package B	$2995.00
Additional Stealth Pillar	$995.00
Stealth Video Rental Package	$1995.00


NDS Radio Frequency Antenna Systems

Stealth 8.2 MHz Single Aisle		$1995.00

	Consisting of two antenna pillars, the "Stealth" provides excellent detection of hard and soft security tags, based on single 3ft wide aisle. Additional pillars allow you to protect multiple door entry/exit configurations with intervals of 3ft between pillars. (see package details above) Frequency: 8.2 MHz Dimensions: 1' wide x 5' high (.3m wide x 1.54m high) Power Supply: 110V Finish: Chrome Compatible with Checkpoint, Knogo, Keytec and other RF sensor tags! This 2 pillar system includes transmitter and receiver, power supply with 6ft power cord, 2 connectors and 15ft low voltage wire



Stealth 8.2 MHz Double Aisle		$2995.00

	Consisting of three antenna pillars, the "Stealth" provides excellent detection of hard and soft security tags, based on two 3ft wide aisles. Frequency: 8.2 MHz Dimensions: 1' wide x 5' high (.3m wide x 1.54m high) Power Supply: 110V Finish: Chrome Compatible with Checkpoint, Knogo, Keytec and other RF sensor tags! This 3 pillar system includes transmitter and two receivers, power supply with 6ft power cord, 2 connectors and 15ft low voltage wire



Sentinel 2.0 MHz Single/Double Aisle		$1395.00

	Consisting of a single antenna pillar, the “Sentinel” provides excellent detection of hard detection tags in a single aisle or double aisle application, based on 3ft aisle widths. Additional pillars allow you to protect multiple door entry/exit configurations with intervals of 6ft between pillars. (see package details above) Frequency: 2.0 MHz Dimensions: 1.2' wide x 5.2' high (.4m wide x 1.6m high) Power Supply: 110V Finish: Chrome This single pillar system includes transmitter, power supply with 6ft power cord


NDS Detachers, Deactivators and Detuners

Hard Tag Detacher		$60.00

	This is used to detach pins of all types and sizes from our hard tags. It will release the attachment pin quickly and easily every time. Magnetic Force: >= 7500 GS (super strong) Dimensions: 2.8” Dia x 1.8” High, Bottom Mount Finish: Silver Matte



Soft Tag Deactivator Base & Table Pad		$695.00

	Detects and deactivates soft tags for high volume use of soft tags. Works every time… no embarrassed customers with false alarms. It will also detect the presence of hard tags and it will not destroy credit cards. Soft tags are deactivated when passed across the Table Pad surface. As direct contact of tag with pad is not required, the pad can even be mounted under wood counters. Base Dimensions: 5.75" x 9" x 2.5" Capacity: 2 devices (table pads, hand helds or one of each) Power Supply: 110V Table Pad Dimensions: 12" x 12" Colour: Black



Soft Tag Detuning Label		$0.03
Unit pricing based on multiples of 1000 Minimum Order Quantity is 1000

	A deactivation device used with our soft tags for low volume use applications. Just place this “Paid” sticker on the soft tag to suppress tag detection by the antenna system. Soft tag not included. Dimensions: 1.5” x 1” Oval Finish: White with red print


NDS Radio Frequency Hard and Soft Tags

There’s nothing that can’t be protected with RF tags – including metal! Clothing – casual wear, business wear, evening wear, accessories; Hardware – hand tools, power tools, tool cases; Sporting Goods – baseball bats, golf clubs, skateboards; Video/Audio – movies, music, games AND the list goes on….. Tags are compatible with Checkpoint, Knogo, Keytec and other RF systems!
Radio Frequency Hard Tags - Our super strong hard tags, when used with pins and/or optional lanyards, provide the best protection for a variety of products, including metal. *All hard tags are supplied with attachment pins*, and are available in a variety of styles, frequencies and sizes to suit your needs.


Small Square - 8.2 MHz		$0.39
Unit pricing based on multiples of 1000 Minimum Order Quantity is 100
	Dimensions: 1.9" x 1.6" Finish: Black or White



Small Round - 8.2 MHz		$0.39
Unit pricing based on multiples of 1000 Minimum Order Quantity is 100
	Dimensions: 1.6" Dia Finish: Black or White



Large Square - 8.2 MHz		$0.45
Unit pricing based on multiples of 1000 Minimum Order Quantity is 100
	Dimensions: 2.7" x 2.3" Finish: Black or White



Large Round - 8.2 MHz		$0.45
Unit pricing based on multiples of 1000 Minimum Order Quantity is 100
	Dimensions: 2.3" Dia Finish: Black or White



Large Round - 2.0 MHz		$0.45
Unit pricing based on multiples of 1000 Minimum Order Quantity is 100
	Dimensions: 2.3" Dia Finish: Grey



Radio Frequency Cinch Tag complete with lanyard - For those special tagging requirements. Anything cylindrical – bottle, baseball bat, golf club, hammer…

Large Round with cable lanyard- 8.2 MHz		$0.95
Unit pricing based on multiples of 1000 Minimum Order Quantity is 100
	Dimensions: 2.2" Dia Finish: Black with PVC coated steel cable



Radio Frequency Soft (Paper) Tags can be used for applications where a hard tag is just not suitable or can’t be secured with a pin or lanyard. Use with items such as boxes, bottles, and pre-packaged items. Tags come on rolls and are available in a variety of styles, frequencies and sizes to suit your needs.

8.2 MHz Deactivatable
4cm x 4cm,	White	$0.06
4cm x 4cm,	Bar Code	$0.06
5cm x 5cm,	White	$0.05
5cm x 5cm,	Bar Code	$0.05
8.2 MHz Non Deactivatable
4cm x 4cm,	Be Kind Rewind	$0.07
4cm x 4cm,	Bar Code	$0.07
9.5 MHz Non Deactivatable
4cm x 4cm,	Be Kind Rewind	$0.07
4cm x 4cm,	Bar Code	$0.07
Unit pricing based on multiples of 1000 Minimum Order Quantity is 1000

NDS Specialty Tags
Even if you are not using Radio Frequency Electronic Article Surveillance, we have a variety of other tags available to suit all makes and models of EAS systems … … from benefit denial tags to dual technology tags and Sensormatic tags.

Benefit Denial Ink Tag		$0.55
Unit pricing based on multiples of 1000 Minimum Order Quantity is 100

	Thieves won't want items tagged with these -- the 2 ink vials will burst if the tag is tampered with; destroying the garment. Additionally, if you have EAS installed in your store, you can achieve double protection by using a theft detection tag with the ink tag, instead of the standard clutch locking mechanism. Dimensions: 1" x 1.5" Finish: White Tags are supplied with standard clutch locking mechanism.



Combo Tag - 8.2 MHz RF & 58 KHz AM		$0.55
Unit pricing based on multiples of 1000 Minimum Order Quantity is 100

	Now you are no longer stuck with a proprietary EAS technology. These tags can work with both Sensormatic AM and Radio Frequency systems. No worries about tag migration from store to store. This is an excellent solution allowing you to easily bring radio frequency EAS into your loss prevention program. Dimensions: 2.5" Dia Finish: White



AM Tag - Sensormatic compatible


Max Tag I (short)		$0.55
Unit pricing based on multiples of 1000 Minimum Order Quantity is 1000
	Supplied with attachment pin Dimensions: 2" x .75" Finish: Beige



Max Tag II (long)		$0.55
Unit pricing based on multiples of 1000 Minimum Order Quantity is 1000
	Supplied with attachment pin Dimensions: 3.5" x .75" Finish: Beige



Super Tag		$0.55
Unit pricing based on multiples of 1000 Minimum Order Quantity is 1000
	Supplied with attachment pin Dimensions: 3.5" x 1" Finish: Grey



Pencil Tag		$0.55
Unit pricing based on multiples of 1000 Minimum Order Quantity is 1000
	Supplied with attachment pin Dimensions: 2" x .5" Finish: Grey

NDS Tag-to-Merchandise Attachment Devices

Lanyard with looped ends		$0.24
Unit pricing based on multiples of 1000 Minimum Order Quantity is 100

	Use this with the hard tag and pin to protect items such as power tools, tool cases, golf bags, skateboards, etc. Tag and pin not included Dimensions: 8" lg Finish: plastic coated stranded steel wire - aircraft grade



Lanyard with straight ends		$0.20
Unit pricing based on multiples of 1000 Minimum Order Quantity is 100

	Crimped at one end. This is used instead of an attachment pin. The straight end inserts through our hard tags to loop through/around your merchandise. Tag not included. Dimensions: 7" long Finish: Stranded steel wire - aircraft grade



Attachment Pin		$0.04
Unit pricing based on multiples of 1000 Minimum Order Quantity is 1000

	Extras for all hard tags. Dimensions: .64" lg shaft with flat head Finish: Chrome



Cable Clip		$0.06
Unit pricing based on multiples of 1000 Minimum Order Quantity is 1000

	Use this simple little clip to secure your hards tags to the electrical cable of a power tool or to a golf putter or anything else you can imagine. Tag and pin not included. Dimensions: 38" Dia Finish: Black



CD Safer		$0.99
DVD Safer		$1.55
Unit pricing based on multiples of 1000 Minimum Order Quantity is 100

	Reusable case with built-in locking mechanism that is released with our hard tag detacher at time of checkout. Dimensions: All safers fit standard CD/DVD packaging Finish: Clear plastic



Cigarette Carton Safer		$3.50
Unit pricing based on multiples of 1000 Minimum Order Quantity is 100

	This will protect a carton of soft pack cigarettes. Dimensions: fits standard US soft pack 20's Finish: Clear plastic

NDS Installation

Installation per pillar - anywhere in US or Canada		$175.00

NDS Order Total

Total in US Dollars
	Shipping, Duty and Taxes are extra as applicable

Warranty - 1yr return to vendor (retain boxes for warranty and shipping purposes) Antenna Installation Information will be provided with order. Note: Sizes and colour of some products may not be exactly as shown.


Contact & Shipping Information
** indicates required information
Your name:	**
Company name:	**
Address info:	**
Address:
City:	**
State/Province:	**
Zip/Postal:	**
Phone No:	** include your area code
Fax No:
E-mail:	**

	If your shipping address is different from above, please enter details below so we can include a freight estimation with your quote.

Address info:
Address:
City:
State/Province:
Zip/Postal:

		NDS Tel: 1-519-752-4775
national deterrent systems © 2003 all rights reserved

Check out the great price savings below!